Birdseye Maple composite wood veneer 24" x 21" on paper backer 1/40" thick #1100

Birdseye Maple composite wood veneer 24″ x 21″ on paper backer 1/40″ thick #1100

Name: Birdseye Maple composite wood veneer 24" x 21" on paper backer 1/40" thick #1100
SKU: mx1_120769158225_DB1A
Availability: InStock

$150.00

1 in stock

REQUEST A QUOTE

SKU: mx1_120769158225_DB1A Category: Wood Edgebanding

Description
Additional information

Birdseye Maple composite wood veneer sheet 24″ x 21″ with paper backer x 1/40″ thickness. Composite wood veneer is real wood that is dyed and sliced in a manner that produces consistent , clean, defect free sheets. It cuts, laminates, and finishes like any other wood veneer. Ships rolled in long narrow box with application instructions. Usually applied with contact cement. Product code # 1100.

Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.

About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.

Backed products come with complete application instructions that are simple and clear.

For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

Thickness: (will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40”
Wood-backed veneers = 1/25”
Raw plain veneer with no backing = 1/32”-1/42”

How to cut: Generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
How to finish: Most any conventional finishing products can be used with veneer that is applied correctly. Staining or clear coating is fine.

Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.
Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.

Listed with ExportYourStore.com

Weight	4 oz
Dimensions	27.00 × 6.00 × 6.00 in
VENEER TYPE	Paper Backed
VENEER CUT	Rotary Cut
MODEL	Recon engineered reconstituted flexible roll 10 m
UPC	Does not apply
MPN	Does Not Apply
WOOD TYPE	Birsdseye Maple
ITEM TYPE	Veneer Sheet
BIRDSEYE MAPLE WOOD VENEER COMPOSITE CUT	1261 Prima Birds eye Brookside figure paper backer
Condition	New

Birdseye Maple composite wood veneer 24″ x 21″ on paper backer 1/40″ thick #1100

Related products

Login

Register