16 micro jets provide precise but gentle rinsing with brush on the glass Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme) Provides over-bristle micro jet rinsing Flow rate is half that of the standard micro-jet rinse-bar and about equivalent to standard pencil or Fanjets – recommended 1.5 – 2lpm Jet angle is 3° higher than standard rinsebar to allow for lower flow rates Height of jets can be adjusted Can be used with internal brush jets as well Lightweight at 41g Uses John Guest connections on unit Uses standard Brush T Connector and jet hose – optional extra Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws. if used on Xtreme will need 16mm) Please note: The rinse bar does not come with the brush & gooseneck pictured